A. Overview
Applicable for all kinds of materials and
products in textile, rubber, plastic, synthetic leather, tape, adhesive
products, plastic film, composite materials, electronics, metal, and other
industries to do stretching, compression, bending, shearing, peeling (90
degrees and 180 degrees), tearing and other tests to determine the quality of
the product.
The face mask tension tester has a simple
structure, which is easy to operate. It can be placed on the workbench for
testing. It adopts an electronic control system, the speed controller regulates
the governor motor, and then the T-shaped screw is driven by transmission to
drive the loading sensor to rise and fall to complete the tensile or
compression test. The real-time force value and displacement are output by the
sensor and display in the monitor.
B. Technical Parameters
1. Pull Strength options: 0-200kg
2. Accuracy: within ±0.5% of the indicated
value
3. Display Mode: LCD display, Chinese
version, film touch keys
4. Unit: Kg, lb, N
5. Data Sampling Frequency: 200times/sec
6. Effective Test Width: 150mm
7. Effective Stretching Space: 500mm
(excluding fixtures)
8. Test Speed Range: 50-300mm/min step-less speed
regulation and 5 speed gears
9. Displacement Measurement Accuracy: within
±0.5% of the indicated value
10. Breakpoint Ratio Setting: 0～99％, users can set proper breakpoint according to different materials
11. Workbench Protection: top and bottom
travel limit device
12. Overload Protection: automatic protection
will be effective if over 10% of the maximum load
13. Fixtures: one set of stretching fixtures
14. Dimension: 450×500×1400mm
15. Weight: about 60 Kg
16. Power Supply: 220V/50Hz
