|
Model/ Parameter |
AG-I34 |
|
Item Name |
The Scratched Pin |
|
Standard |
IEC60335-1 clause 21 and IEC60950-1. |
|
Application |
The test pin is used to do the scratch resistant test of the electrical solid insulation surface. |
|
Test Sample |
Home appliance fixed insulation accessible part and coated printed board. |
|
Feature |
Test method: make sure the angle between the pin and the surface of the sample is 80-85°. Then use the pin which is loaded with the axial force of 10±0.5N to scratch the surface of the sample at a speed of approximately 20mm/s. This test pin can be equipped with 20N weight to reach the load of 30N.This scratched pin shall be used with resistance scratching tester. |
|
Pin head |
A cone with the angle of 40° |
|
Tip is rounded with a radius |
0.25mm±0.02mm |
|
Mess |
10±0.5N |
|
Material |
Quenched steel |
產品詳情
簡單介紹：
IEC60335-1 clause 21 and IEC60950-1.
詳情介紹：
